Eurocell 200 RL - Technical Data Sheet
Eurocell® 200RL, spherical beads, is produced as “Expandable Polystyrene” containing Pentane in shape of spherical grains as expansion agent.
Bead Size Range (mm): 0,9 – 1,25
Sieve Analysis: 0.9 mm - 2.5 mm min %99
Bulk Density: ≈ 615 kg/ m3
Eurocell® 200RL is an EPS class, which can be produced in density ranges of 10 kg/m3 and lower (two expansion) suitable for block covering, which is cohered in a very good manner, and ensuring rapid molding with its short cycle time.
Eurocell® 200RL in general; is used for good contact suitable and other packaging varieties, insulation applications is not requiring fire classification, for industrial application, and shape molding applications with impact absorber.
All Eurocell® products are made in standard 1100 kg or 1125 kg big bag packages. The content insulation between the product and big-bag ensures the protection of the product by means of an insulated plastic inner lining.
Eurocell® 200RL should be stored in well-ventilated storage areas with a temperatures preferably not exceeding 25°C. It should be protected against unsuitable weather conditions and direct sun light. Partially used containers should be closed as tight as original conditions, paying attention to avoid any space between the raw material and lining, and should be consumed in a short time. In order to maintain the expansion potential it is recommended to start the transformation within one month after delivery, if the package is not opened.
From expansion of the beads to the block or mold shaped products, the entire transformation process is managed with water vapor.
Eurocell® 200RL can achieve with two expansion processes a density of 10 kg/m3 and below. The minimum density achievable may vary depending on the expander type and process conditions. The intermediate storage time in silos is recommended as 3-12 hours depending on the atmosphere and process conditions.For special applications please contact our technical service
Eurocell® 200RL requires to be avoided restrictively from sparks and flames during phases of processing and storage. Grounding of entire equipment and machines are required, in order to prevent against static electricity development on the product conveying lines and during product processing. Also ensure ventilation on floor level during the storage and process phases. Please make sure to read the “Material Safety Data Sheet” (MSDS), which contains entire details of the measurements required to be taken.
Eurocell® 200RL is suitable and allowed to be used for food contact applications.
Eurocell® 200RL is produced in Izmir, Turkey.